Useful Tool Storage for Machine Knitting

It is nice to be organized and have everything you need for knitting next to your machine. My favorite tool storage containers are my 3D printed tool basket ,which fits on the Passap E6000 tension mast, and the Harbor Freight magnetic tray, which sticks to the side of a metal knitting table. Read on to see photos and links.

The 3D printed tool holder basket clips onto the E6000 tension mast (photo above). The tool basket has a solid bottom with a divider which helps keep tools upright and organized. The openwork design makes it easy to see what is inside. To mount the tool holder, simply slide the 3D printed clip onto the mast and then connect the tool holder basket. You can put two tool baskets on one clip or have a 3D printed bowl on one side and a tool basket on the other side. The tool basket is sold as a single basket (no mast clip) or as a tool basket and clip set if you do not have one of the clips. Link to the tool basket is here.

Magnetic storage is great if you have a metal knitting table. While the basic magnet containers are fairly easy to find, finding one with strong magnets is not easy to find!. Believe me, I have tried plenty in the past that would barely stay stuck to the knitting table/stand with only a latch hook in the cup. Don’t worry, there are some great ones!! The best (by far) I have found are these 2 from Harbor Freight…

The Harbor Freight magnetic storage tray. The magnets on this tray are so strong, you could load it full of heavy machine weights and it will still stay in place. There are holes on the side of the tray which can hold latch tools. The tray holds small parts, needle selectors, and everything else. The BEST thing about this tray is the magnets on the back are very strong. You can place small parts like a double eye bodkin over the magnet (on the front side) of the tray. (The magnets are behind the rectangle indentions seen in the photo). I have a small cast on comb and my double eye bodkin stuck to the magnet, not in the tray.

The Harbor Freight magnet tray is a great tool holder as it is stuck to the side of the machine table (out of the way). The magnets are super strong and hold a lot of weight. Link to the tray here. You need one! They come in a range of colors. You may want to go with the basic white color, but the bright green is super nice. I have one of these trays for each of my Passap machines and also have one on the metal leg table I use for my bulky. It may also work well on the metal Duo table too.

The other magnetic holder is the Harbor Freight magnetic strip. I don’t have a good photo, but you can view via the link.

Harbor Freight is a US company, but you may have some luck finding these items locally/online under a different brand name at a shop that sells tools/hardware type items.

The post Useful Tool Storage for Machine Knitting appeared first on Herman Hills Farm.